os.1mikis,
Hm, nešto smo posustali sa svežim softverom u poslednje vreme... Red
je da to malo ispravimo ;) Za početak:
FSort 1.2 - File Sorting Utility (Replacement of C:Sort).
(c) 1995 Martin Mares, MJSoft System Software
Much faster then Sort, supports input from stdin and output to stdout
(PIPES !!!), eats less RAM. Requires Kickstart 2.04 or higher.
os.2mikis,
MultiCX 1.55 (20.2.95) - jedan od ubedljivo najkorisnijih commodity-ja
za OS2.04+!! Dugačak svega 7KB, zameuje desetinu drugih komoditija i
jutilitija (screen saver, noclick, wildstar, mouse acceleration, mouse &
key blanker, screen & window cycle, SUN windows, keys, mouse, CapShift,
Enter ASCII, PopCLI...) Ma skidajte odmah ;)
os.3mikis,
SCopy 1.04 - replacement for the standard Copy command. This copy
command is fully compatible with the standard Copy command but also
offers some extra features, most notably three different kind of
progress-displays. On large files (300K and up) SCopy can get much
faster than the standard copy command if memory will allow for big
enough buffers.
SCopy requires KickStart V2.04 or higher to run.
os.4mikis,
The DEV Handler 1.02 - Console, AUX and Raw Disk Handler.
Adds many improvements and UNIX features to CON, AUX and RAW devices
(named consoles, special files representing devices, multiuser
protection...)
os.5mikis,
man.datatype (V39.4, by Stefan Ruppert) -- This is a Unix manual page
(.man) datatype for using in MultiView or similar programs.
os.6mikis,
binary.datatype (V39.10, by Stefan Ruppert) -- This is a binary datatype
for using in MultiView or similar programs. The datatype loads any
binary file and displays it in a hex format.
os.7mikis,
targa.datatype (V39.0, by Arthur Pijpers) -- This datatype is used for
showing Targa image files. Support for 8, 24 and 32 bits images has been
implemented. 15 and 16 bit images are not supported yet. 24 and 32 bit
images will be converted to HAM8, so you need AGA or AGA emulation to
view these images.
os.8mikis,
UnDel 1.1 -- file undeleting utility (one of the fastest!!).
Requires KS2.04+ and ss.library 5.0+ (included).
Features:
- Supports any standard filesystem - OFS / FFS + DirCache / INTL mode
- Very fast (only free blocks are scanned, written in assembly etc.)
- Special option for systems with small amount of memory
- Nice user interface in shell window ;-)
(If some non-standard console is detected, new CON: window is opened.)
- Recovered files are copied to another device
- Protection bits and file note are also recovered
- UNDEL is pure and can be made resident
(c) 1994 Martin Mares, MJSoft System Software
os.9mikis,
FCD V1.02 (by Nico Max) -- FCD stands for FastChangeDirectory and
might be a useable replacement for the original CD. So if you want to
change to a dir lying in the deepest jungle of your HD f.e.
bla/hi/jo/here/is/right. With FCD you only write: FCD right.
FCD needs Kick2.0.
os.10mikis,
ShutWB 1.0 (by Carsten Orthbandt) -- ShutWB will close or open the
Workbench screen if you press the shortcut defined in the tooltypes.
Requires Workbench 2.0 or better.
os.11mikis,
WBExtender 2.01 (by Martin Berndt) -- This nifty little program replaces
your WB Titlebar and the "About..." Requester with more useful
information about your system - OS version, free ChipMem and FastMem,
largest free block of memory, chipset used, number of active tasks,
libraries and screens, serial and parallel ports status... Also, you can
flush unused resources (libs, fonts, etc.) or reboot your computer from
"About.." requester! Requires AmigaOS 3.x.
os.12rcolic,
Jos jedno trazenje od strane mene *:-)
Ima li neko UNIX okruzenje za amigu ?
Citao sam u SK-u neki opis ali to bese vrlo davno... Ako ima neko nek se javi
thx
Acid
os.13vpoznanovic,
>> Ima li neko UNIX okruzenje za amigu ?
>> Citao sam u SK-u neki opis ali to bese vrlo davno... Ako ima neko nek se
>> javi
Linux za Amigu je u fazi razvoja. Ono što je do sada gotovo može se naći
na 'shareware' BBS-ovima po svijetu (uključujući i AmiNet) i prilično je
kratko. Nezgodno je samo to što operativni sistem zahtijeva MC68030 sa
MMU zbog rada sa virtuelnom memorijom.
Mikiš će ti sigurno dati više informacija, on je i praktično u tim
vodama. :)
os.14mikis,
+> Ima li neko UNIX okruzenje za amigu ?
Pa ima, ali bojim se da ti neće mnogo koristiti... Naime, pre
izvesnog vremena sam na jednom nemačkom BBS-u video Amiga Linux. Radilo
se praktično o alfa verziji, ali sam sve jedno počeo da ga skidam. Nakon
što sam sat i po proveo skidajuću skoro sve u vezi sa njim, prilikom
pokušaja instalecije javio mi je da zahteva 030-icu sa MMU-om :( Takođe,
bar 4 MB memorije nije na odmet.
Daklem, dok ne nabavim nešto jače, Linux mi stoji u fioci na
disketama... Ako neko ima odgovarajuću mašinu i želi da proba, neka mi
se obavezno javi :)
Uzgred, pored Linuxa, koji je u vrlo ranoj fazi razvoja (postoji
samo kernel i par dodatnih jutilitija), postoji i NetBSD, koji je već
završen. Najjednostavniji način da se dođe do njega je preko Amineta,
ili sa nekog CD-a tipa Aminet ili Meeting Pearls. Ne znam koji su
njegovi hardverski zahtevi, ali pretpostavljam da su slični Linuxovim.
Nadajmo se da će zaista krenuti ovo sa BITS-om i Internetom, pa da i
mi dođemo do svih tih lepota :) A čim na Sezamu prorade brži modemi,
poslaću sve što imam ovde :)
os.16mikis,
Za sve koji su zainteresovani za Linux (Unix) na Amigi (i ostalim
M680x0 mašinama - Atari, Mac):
Linux/m68k FAQ Version 1.0 (13.03.95)
Frequently Asked Questions on Linux/m68k
A Linux port to Motorola's 680x0 processors
os.17mikis,
Još jedan sjajan datatype:
EXE Datatype (v39.4) -- prikazuje podatke o izvršnim (executable)
programima iz Multiviewa ili bilo kog drugog programa koji podržava
datatype.library. Podaci koje exe.datatype prikazuje o programu su:
Name
Size
Date
Protection-Bits
Comment
Versionstring
Libraries
Devices
Resources
Fonts
Naravno, zahteva OS 3.0+ :)
os.18mikis,
targa.datatype (v39.1, 18.03.95) -- This datatype is used for showing Targa
image files.
New features in version 39.1:
- Added 15,16 bit support
- Added support for 8,15,16 and 32 bit colourmaps and for pictures
without a colourmap
- Added support for interleaved pictures
- Added support for right to left pictures
- Fixed small problem with 15,16,24 and 32 bit pictures, that also have a
colourmap
- Swapped some colours in the HAM palette, to give the pointer (almost) the
standard Workbench colours
os.19mikis,
TPD - Tron's PCX DataType V39.7 -- A PCX datatype for OS 3.0 or newer
This datatypes enables your system to read PCX files.
Advantages of this PCX datatype:
- fast:
- chunky to planar conversion via WritePixelLine()
- asynchronous I/O
- low memory usage
- supports:
- CGA/EGA format (planar)
- VGA format (chunky)
- true color format (hybrid)
- converts true color into HAM/HAM8 on EGS/AGA machines
- screen mode selection via BestModeID()
os.20mikis,
VMem 1.0 (by Lee Braiden) -- Virtual Memory system w/memory emulation
Release 1 VIRTUAL MEMORY SYSTEM for ALL Amigas with WB2 or above
(requires programs to be specially written for it, though.) Incorporates
"memory emulation" to allow chip mem to act as FAST mem,etc. Includes a
Preferences program in Workbench 2+ style. Complete with programming
header files, AutoDocs(tm), and an example program with source. The rest
of the package is Binary only.
os.21vpoznanovic,
>> VMem 1.0 (by Lee Braiden) -- Virtual Memory system w/memory emulation
>> Release 1 VIRTUAL MEMORY SYSTEM for ALL Amigas with WB2 or above
>> (requires programs to be specially written for it, though.) Incorporates
>> "memory emulation" to allow chip mem to act as FAST mem,etc. Includes a
Pa, radi li?
os.22ljubinko,
VoiceShell
Voice Recognition version 1.21 date 1994.03.13
Control your Amiga with voice commands.
VoiceShell is THE voice recognition program for the Amiga computer. It
allows you to start a program just by saying the program's name, actually
it allows you to control just about everything about your Amiga. VoiceShell
is a replacement project for VCLI by Richard Horne. VoiceShell however
uses the same library, also by Richard Horne, to recognize the words.
author: Tomi Blinnikka
requirements:
Requires Kickstart 2.04 or higher, voice.library (included), sampler
hardware and microphone.
distribution: Shareware
voicesh.lhaos.23mikis,
+>>> VMem 1.0 (by Lee Braiden) -- Virtual Memory system w/memory emulation
+>
+>Pa, radi li?
Radi... Ako napišeš programe koji ga koriste ;)) :
+> >> (requires programs to be specially written for it, though.)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
:)
os.24dex.dexter,
*>+>>> VMem 1.0 (by Lee Braiden) -- Virtual Memory system w/memory emulation
*>+>
*>+>Pa, radi li?
*>
*> Radi... Ako napises programe koji ga koriste ;)) :
Photogenics ga za divno cudo podrzava.. ali ako imas MMU :( Ali su najavili
da ce u buducoj verziji programa raditi na svim masinama.. e jedva cekam tu
sledecu verziju, pa da mu roknem jednu targu od 10-tak megabajta.. :)))
Pa da vidim reakciju.. :)
(doduse Image studio se zadovoljavajuce dobro snalazio sa takvim slikama :)
os.25mikis,
+> Photogenics ga za divno cudo podrzava.. ali ako imas MMU :( Ali su najavili
+> da ce u buducoj verziji programa raditi na svim masinama.. e jedva cekam tu
:)) Pa kakva je to podrška ako mu treba MMU ;) Uz MMU i Gigamem (ili
neki sličan program) svaki program će podržavati virtuelnu memoriju.
Poenta VMema je da omogućava pisanje programa koji će koristiti
virtuelnu memoriju na mašinama bez MMU-a (slično ImageStudiju).
os.26mikis,
wpg.datatype V39.0 --- This datatype is used for showing wpg or
WordPerfect Graphics image files. Only bitmaps are supported.
os.27mikis,
CPU-Control 1.10 -- a CPU-like utility for Kickstart/WB 2.0 including a
GUI. Recognizes external changes of any of its parameters. Allows moving
VBR (VectorBaseRegister) to Fast-RAM, which significantly speeds up all
Traps/Interupts. Many CLI Options have been included to allow usage in
scripts.
os.28dex.dexter,
*> :)) Pa kakva je to podrska ako mu treba MMU ;) Uz MMU i Gigamem (ili
*>neki slican program) svaki program ce podrzavati virtuelnu memoriju.
*>Poenta VMema je da omogucava pisanje programa koji ce koristiti
*>virtuelnu memoriju na masinama bez MMU-a (slicno ImageStudiju).
U pravu si.. u stvari ja sam se pogresno izrazio kad sam rekao da podrzava, a
zapravo pise da lepo radi sa VMEM-om. Inace za koriscenje potencijala MMU-a
potreban je odgovarajuci program koji pravi virtualnu memoriju.. Teorijski bi
trebalo da sa takvim programom i MMU-om svi programi rade bez problema sa
virtualnom memorijom, ali nije uvek sve tako.. Bio je test valjda gigamem-a u
nekom starom casopisu, gde je pisalo da npr. dpaint nece da radi sa virt.
memorijom i jos poneki programi..
Dakle, stekao sam zakljucak da nije potrebno da samo imas MMU i program pa
da ti odma pravi virt. mem.. Ipak je bolje kad sam program podrzava taj program
za MMU.. uh.. A photogenics bas to radi.. :)
Evo, text-a...
Virtual Memory
--------------
Photogenics works well with the Public Domain VMEM Virtual Memory system.
You need a processor with a memory management unit (MMU) to use such
Virtual Memory systems. Make sure you insist on an MMU when you upgrade
your processor. Future versions of Photogenics are highly likely to
support Virtual Memory on any Amiga, but a MMU allows real Virtual
Memory with all applications.
E, sad mozda se u onom text-u radilo o nekoj staroj verziji gigamem-a, ali
jos uvek moze da ti zafali chip-a, pa si opet na istom.. :))
os.29ljubinko,
>CPU-Control 1.10 -- a CPU-like utility for Kickstart/WB 2.0 including a
>GUI. Recognizes external changes of any of its parameters. Allows moving
>VBR (VectorBaseRegister) to Fast-RAM, which significantly speeds up all
>Traps/Interupts. Many CLI Options have been included to allow usage in
>scripts.
Skinuo samo, probao i dobio vrednost MIPSa za moju Amigu 10.000150.
SysInfo 5.22 mi pokazuje 5.63 MIPSa - sta je tacno ? Ili kome verovati?
Pozdrav
os.30vpoznanovic,
>> Skinuo samo, probao i dobio vrednost MIPSa za moju Amigu 10.000150.
>> SysInfo 5.22 mi pokazuje 5.63 MIPSa - sta je tacno ? Ili kome verovati?
Je l' ti ono bješe imaš Viper 030/28? U tom slučaju je SysInfo u pravu.
Ali, odakle sad odjednom SysInfo 5.22? Ne pamtim ni jednu novu verziju
od 3.24.
os.31dex.dexter,
*>Ali, odakle sad odjednom SysInfo 5.22? Ne pamtim ni jednu novu verziju
*>od 3.24.
Mozda je covek mislio, na verziju 3.22 :))
os.32ljubinko,
>> Skinuo sam, probao i dobio vrednost MIPSa za moju Amigu 10.000150.
>> SysInfo 5.22 mi pokazuje 5.63 MIPSa - sta je tacno ? Ili kome verovati?
>Je l' ti ono bjese imas Viper 030/28? U tom slucaju je SysInfo u pravu.
>Ali, odakle sad odjednom SysInfo 5.22? Ne pamtim ni jednu novu verziju
>od 3.24.
Lapsus, radi se o verziji SysInfo 3.22.
Ipak ne znam ko je u pravu.
Imas li neko objasnjenje za to koji od ova dva programa daje tacnu
vrednost MIPSa ?
os.33ljubinko,
> VoiceShell
Slenje ovog programa mi je omogucio Kangaroo. Zahvaljujem mu se
i izvinjavam za zakasnjenje i propust sto se nisam zahvalio kod
slanja programa.
os.34vpoznanovic,
>> Ipak ne znam ko je u pravu.
>> Imas li neko objasnjenje za to koji od ova dva programa daje tacnu
>> vrednost MIPSa ?
Deklarisana brzina Amige 500 je oko 0.6 MIPS-a; taj podatak možeš pronaći
na raznim mjestima. Mašina sa 68020 procesorom na duplo većem kloku je
2.x puta brža. Dodavanjem FAST memorije ubrzanje se penje na 4.x puta, a
povećanjem kloka još jednom na dvostruku vrijednost na 8.x puta. 0.6 * 8
= 4.8, pa kad uzmeš u obzir ono 'x' i nešto veću brzinu koju postiže
68030 procesor, dobijaš onu vrijednost koji ti je SysInfo dao.
os.35ljubinko,
>> Ipak ne znam ko je u pravu.
>> Imas li neko objasnjenje za to koji od ova dva programa daje tacnu
>> vrednost MIPSa ?
>Deklarisana brzina Amige 500 je oko 0.6 MIPS-a; taj podatak mozes pronaci
>na raznim mjestima. Masina sa 68020 procesorom na duplo vecem kloku je
>2.x puta brza. Dodavanjem FAST memorije ubrzanje se penje na 4.x puta, a
>povecanjem kloka jos jednom na dvostruku vrijednost na 8.x puta. 0.6 * 8
>= 4.8, pa kad uzmes u obzir ono 'x' i nesto vecu brzinu koju postize
>68030 procesor, dobijas onu vrijednost koji ti je SysInfo dao.
Dakle tako je, a ovaj drugi ne pokazuje tacno ? Ni dalje nisam siguran.
(Da li je 68030 samo 1.15 puta brziod 68000 na istom kloku kako ispada
po Sysinfu ili mozda 2.09 puta ?)
Da li bi neko istestirao uporedno i druge Amige sa ovim programima, da
vidimo da li i kod drugih konfiguracija pokazuje razliku ?
os.36ljubinko,
>> Ipak ne znam ko je u pravu.
>> Imas li neko objasnjenje za to koji od ova dva programa daje tacnu
>> vrednost MIPSa ?
>Deklarisana brzina Amige 500 je oko 0.6 MIPS-a; taj podatak mozes pronaci
>na raznim mjestima. Masina sa 68020 procesorom na duplo vecem kloku je
>2.x puta brza. Dodavanjem FAST memorije ubrzanje se penje na 4.x puta, a
>povecanjem kloka jos jednom na dvostruku vrijednost na 8.x puta. 0.6 * 8
>= 4.8, pa kad uzmes u obzir ono 'x' i nesto vecu brzinu koju postize
<68030 procesor, dobijas onu vrijednost koji ti je SysInfo dao.
Proverio sam i sa AIBB 6.5 i dobio da je moja Amiga u poredjenju sa
standardnom Amigom 1200 brza i to za sledece testove:
EmuTest 3.51 puta
MemTest 3.23
Matrix 3.28
Dhrystone 3.44
Flops 21.39 (a u uporedjenju sa A 600 44.74 puta)
FMath 9.28
FMatrix 2.71 itd itd.
Kako stoji sa testom A 1200 (i drugih konfiguracija) uz upotrebu ovih
programa (SysInfo, CPU, AIBB)? Da li se i tamo razlikuju?
Pozdrav svima!
os.37vpoznanovic,
>> Dakle tako je, a ovaj drugi ne pokazuje tacno ? Ni dalje nisam siguran.
>> (Da li je 68030 samo 1.15 puta brziod 68000 na istom kloku kako ispada
>> po Sysinfu ili mozda 2.09 puta ?)
Ako i dalje nisi siguran, a zaista želiš da budeš, ne preostaje ti ništa
drugo nego da napraviš program u kojem će biti samo jedna prazna petlja i
da onda usporediš vrijeme izvršavanja na standardnoj A1200 (ili na A500)
i na A1200 sa akceleratorskom karticom. Odnose ćeš usporediti sa odnosima
koje ti daju SysInfo i CPU i doći do odgovora. Jeste da način nije baš
precizan, ali s obzirom da se radi o velikoj razlici, mislim da ćeš moći
donijeti nedvosmislen zaključak.
os.38vpoznanovic,
>> Proverio sam i sa AIBB 6.5 i dobio da je moja Amiga u poredjenju sa
>> standardnom Amigom 1200 brza i to za sledece testove:
Nisi rekao, koliku taj program CPU daje razliku između tvoje konfiguracije
i standardne A1200?
os.39ljubinko,
>> Dakle tako je, a ovaj drugi ne pokazuje tacno ? Ni dalje nisam siguran.
>> (Da li je 68030 samo 1.15 puta brziod 68000 na istom kloku kako ispada
>> po Sysinfu ili mozda 2.09 puta ?)
>Ako i dalje nisi siguran, a zaista zelis da budes, ne preostaje ti nista
Skinuo sam karticu sa moje Amige 1200 i ukljucio SysInfo 3.22.
Pokazao je brzinu od 1.34 MIPSa, tj 2.42 puta brzi od A 600.
CPU mi je pokazao 5.000050 MIPSa.
Da podsetim sa karticom (68030/28 MHz, + $ MB FAST RAM, 68882)
SysInfo kaze 5.63 MIPSa, ili 10.20 puta brze od A 600,
a CPU kaze 10.000150 MIPSa.
Neznam sta je tacno, ali je jedno sigurno da bi svi takvi programi
trebalo da se slazu, ili da se minimalno razlikuju. Ove su razlike
neprihvatljive.
CPU nije dobar jer sa karticom mora da bude vise od 2 puta brza
jer je klok duplo brzi, ima koprocesor i fast memoriju. Tu je SysInfo
sa pravilnijim odnosom - verovatno je u celini znatno tacniji
kao sto si i ti tvrdio, ali ne bi trebalo da postoje TOLIKE razlike.
os.40eburanj,
SYSINFO laže (izgleda). Znam neke očite primere gde je pogrešio ;))
os.41mikis,
+> Deklarisana brzina Amige 500 je oko 0.6 MIPS-a; taj podatak možeš pronaći
+> na raznim mjestima. Mašina sa 68020 procesorom na duplo većem kloku je
+> 2.x puta brža.
Tačnije, 2.4 puta (po SysInfo-u). Odatle sledi da je 68020 na istom
kloku brža od 68000 za svega 20%, što je već malo čudan podatak?
Ipak, mislim da je SysInfo pouzdanija referenca po pitanju brzine.
os.42vpoznanovic,
>> CPU nije dobar jer sa karticom mora da bude vise od 2 puta brza
>> jer je klok duplo brzi, ima koprocesor i fast memoriju. Tu je SysInfo
>> sa pravilnijim odnosom - verovatno je u celini znatno tacniji
>> kao sto si i ti tvrdio, ali ne bi trebalo da postoje TOLIKE razlike.
CPU očigledno ne uzima u obzir sve resurse sistema, već radi neku
aproksimaciju prvenstveno na osnovu takta procesora. Nema više nikakve
dileme da je SysInfo precizniji i pouzdaniji program.
os.43ljubinko,
>SYSINFO laze (izgleda). Znam neke ocite primere gde je pogresio ;))
Imas li ideju koji je program dobar ?
os.44vpoznanovic,
>> Tačnije, 2.4 puta (po SysInfo-u). Odatle sledi da je 68020 na istom
>> kloku brža od 68000 za svega 20%, što je već malo čudan podatak?
Za mene je sasvim realan. Zašto bi razlika u brzini između 68020 i 68000
bila veća od razlike između 68030 i 68020?
os.45vpoznanovic,
>> SYSINFO laže (izgleda). Znam neke očite primere gde je pogrešio ;))
Pa reci ih.
os.46mikis,
+> Za mene je sasvim realan. Zašto bi razlika u brzini između 68020 i 68000
+> bila veća od razlike između 68030 i 68020?
Zato što mi je čudno da razlika u brzini procesora različitih
generacija bude samo 20-30%... Intel je još davno sebi zacrtao da svaka
nova generacija procesora bude bar duplo brža od stare, i uglavnom u
tome i uspeva. Doduše, svi znamo da je Motorola dugo vremena bila ispred
Intela (a bogme još uvek je, sa PowerPC-jem) ;)
os.47vpoznanovic,
>> Zato što mi je čudno da razlika u brzini procesora različitih
>> generacija bude samo 20-30%...
Nije tako sa svim generacijama Motorolinih mikroprocesora. MC68040 je
2.5-3 puta brži od MC68030 na istom taktu. I odnos brzina MC68060 i
MC68040 bi, bar prema najavama, trebao biti otprilike toliki.
os.48marshall,
+> Za mene je sasvim realan. Zasto bi razlika u brzini izmedu 68020 i 68000
+> bila veca od razlike izmedu 68030 i 68020?
=>
=> Zato sto mi je cudno da razlika u brzini procesora razlicitih
=> generacija bude samo 20-30%... Intel je jos davno sebi zacrtao da svaka
=> nova generacija procesora bude bar duplo brza od stare, i uglavnom u
Axa... Ali da to oni ne postizu dupliranjem frekvencije rada ?
Zato postoji 486 na 50 MHz, i Pentium na 100 ;))
=> tome i uspeva. Doduse, svi znamo da je Motorola dugo vremena bila ispred
=> Intela (a bogme jos uvek je, sa PowerPC-jem) ;)
EEEeee... Kad bi ovi iz Escoma (ili ko vec bude dizajnirao nove Amige)
bili pametni pa da naprave neku podrsku i softvera za PowerPC, tj. da
pokusaju da naprave kompatibilne masine, makar to bila samo jedna serja
Amiga (i zvala se PowerAmiga ;)
Znam da mnogo xocu, ali..
os.49mikis,
+> Axa... Ali da to oni ne postizu dupliranjem frekvencije rada ?
+> Zato postoji 486 na 50 MHz, i Pentium na 100 ;))
Eto, Amigista a ne zna... ;) Pa i Motorola 68040 ima interno
dupliranje takta (npr. 040/40 MHz interno radi na 80 MHz), samo oni to
ne udaraju na sva zvona...
+> EEEeee... Kad bi ovi iz Escoma (ili ko vec bude dizajnirao nove Amige)
+> bili pametni pa da naprave neku podrsku i softvera za PowerPC, tj. da
+> pokusaju da naprave kompatibilne masine, makar to bila samo jedna serja
+> Amiga (i zvala se PowerAmiga ;)
Vidiš, to se i meni sviđa... I nije nemoguće, s obzirom da je Escom
najavio proizvodnju PowerMac klonova. Uzgred, ako je Apple uspeo da napravi
M680LC40 emulator za PowerPC, ne vidim zašto i Escom to ne bi mogao...
Pogotovu što dobar deo amigine snage leži u custom čipovima, koji bi se
valjda mogli doterati za rad sa RISC procesorom :) Ili, još bolje, da pored
PPC-ja bude ugrađen i jedan 030 procesor, čisto radi kompatibilnosti :))
Uglavnom, ona ideja ljudi iz C= UK - o potpuno novim računarima
sa RISC procesorom i RTG grafikom, koje bi sa starim Amigama povezivalo
samo ime - mi se ni najmanje ne sviđa. Idealna stvar bi bile PowerPC Amige,
pa još urađene prema PREP specifikaciji - tako da na istoj mašini mogu
da se teraju i Windows NT, MacOS, OS/2, Unix... :))
os.50sazalakazu,
+> Axa... Ali da to oni ne postizu dupliranjem frekvencije rada ?
+> Zato postoji 486 na 50 MHz, i Pentium na 100 ;))
>
> Eto, Amigista a ne zna... ;) Pa i Motorola 68040 ima interno
> dupliranje takta (npr. 040/40 MHz interno radi na 80 MHz), samo oni to
> ne udaraju na sva zvona...
>
+> EEEeee... Kad bi ovi iz Escoma (ili ko vec bude dizajnirao nove Amige)
+> bili pametni pa da naprave neku podrsku i softvera za PowerPC, tj. da
+> pokusaju da naprave kompatibilne masine, makar to bila samo jedna serja
+> Amiga (i zvala se PowerAmiga ;)
>
> Vidis, to se i meni svida... I nije nemoguce, s obzirom da je Escom
> najavio proizvodnju PowerMac klonova. Uzgred, ako je Apple uspeo da napravi
> M680LC40 emulator za PowerPC, ne vidim zasto i Escom to ne bi mogao...
> Pogotovu sto dobar deo amigine snage lezi u custom cipovima, koji bi se
> valjda mogli doterati za rad sa RISC procesorom :) Ili, jos bolje, da pored
> PPC-ja bude ugraden i jedan 030 procesor, cisto radi kompatibilnosti :))
> Uglavnom, ona ideja ljudi iz C= UK - o potpuno novim racunarima
> sa RISC procesorom i RTG grafikom, koje bi sa starim Amigama povezivalo
> samo ime - mi se ni najmanje ne svida. Idealna stvar bi bile PowerPC Amige,
> pa jos uradene prema PREP specifikaciji - tako da na istoj masini mogu
> da se teraju i Windows NT, MacOS, OS/2, Unix... :))
Koliko sam ja citao intervjue.... pise da su vec skoro pa zavrsili
razvijanje tih Amiga (text je bio i ovdi na sez-u)
os.51marshall,
+> Axa... Ali da to oni ne postizu dupliranjem frekvencije rada ?
+> Zato postoji 486 na 50 MHz, i Pentium na 100 ;))
=> Eto, Amigista a ne zna... ;) Pa i Motorola 68040 ima interno
Eee.. Pa nemam 040 kod sebe, da bih morao da znam ;)
=> dupliranje takta (npr. 040/40 MHz interno radi na 80 MHz), samo oni to
=> ne udaraju na sva zvona...
Interno..
Ali ja nisam pricao o tome..
Xteo sam da napravim malu salu na racun Pentiuma/100 koji je dva puta
brzi od 486/50..
+> EEEeee... Kad bi ovi iz Escoma (ili ko vec bude dizajnirao nove Amige)
+> bili pametni pa da naprave neku podrsku i softvera za PowerPC, tj. da
+> pokusaju da naprave kompatibilne masine, makar to bila samo jedna serja
+> Amiga (i zvala se PowerAmiga ;)
=> Vidis, to se i meni svida... I nije nemoguce, s obzirom da je Escom
=> najavio proizvodnju PowerMac klonova. Uzgred, ako je Apple uspeo da napravi
=> M680LC40 emulator za PowerPC, ne vidim zasto i Escom to ne bi mogao...
~~~~~~~~~~~~~~~~~
Xardverski ?
=> Pogotovu sto dobar deo amigine snage lezi u custom cipovima, koji bi se
=> valjda mogli doterati za rad sa RISC procesorom :) Ili, jos bolje, da pored
=> PPC-ja bude ugraden i jedan 030 procesor, cisto radi kompatibilnosti :))
Sto bi mozda bila najbolja varijanta (mozda malo skuplja)..
Samo pitanje je da li bi ta dva procesora mogla da se sloze kako treba..
=> Uglavnom, ona ideja ljudi iz C= UK - o potpuno novim racunarima
=> sa RISC procesorom i RTG grafikom, koje bi sa starim Amigama povezivalo
=> samo ime - mi se ni najmanje ne svida. Idealna stvar bi bile PowerPC Amige,
Sta je moc navike :))
Amiga ipak ostaje Amiga..
=> pa jos uradene prema PREP specifikaciji - tako da na istoj masini mogu
=> da se teraju i Windows NT, MacOS, OS/2, Unix... :))
AA ? Napustamo Workbench ? ;))))
os.52mikis,
+> Ali ja nisam pricao o tome..
+> Xteo sam da napravim malu salu na racun Pentiuma/100 koji je dva puta
+> brzi od 486/50..
Biće onda da se nismo najbolje razumeli :) Uostalom, Pentium/100
je više od dva puta brži od 486/50. Tačnije, Pentium je nekih 70-80% brži
od 486-ice na istom taktu, što u ovom sličaju znači da je razlika u brzini
oko 3.5 puta.
+>=> M680LC40 emulator za PowerPC, ne vidim zasto i Escom to ne bi mogao...
+> ~~~~~~~~~~~~~~~~~
+> Xardverski ?
Jok bre, softverski. žak i najveći deo MacOS-a na PowerMacu radi
pod '040 emulacijom.
os.53marshall,
+> Ali ja nisam pricao o tome..
+> Xteo sam da napravim malu salu na racun Pentiuma/100 koji je dva puta
+> brzi od 486/50..
=> Bice onda da se nismo najbolje razumeli :) Uostalom, Pentium/100
=> je vise od dva puta brzi od 486/50. Tacnije, Pentium je nekih 70-80% brzi
=> od 486-ice na istom taktu, sto u ovom slicaju znaci da je razlika u brzini
=> oko 3.5 puta.
Ex, i opet se nismo razumeli :)
Ja rekoh da sam samo hteo da napravim salu...
+>=> M680LC40 emulator za PowerPC, ne vidim zasto i Escom to ne bi mogao...
+> ~~~~~~~~~~~~~~~~~
+> Xardverski ?
=> Jok bre, softverski. Cak i najveci deo MacOS-a na PowerMacu radi
=> pod '040 emulacijom.
Exej.. Pa onda bi ovi koji nameravaju da nastave sa Amigom stvarno i
OZBILJNO trebalo da razmisljaju o PowerPC-u kao osnovi nekih buducih
Amiga (makar samo najjace serje).
os.54teorist,
Ima li neko programčić za pretvaranja skriptova u executable datoteke ??
Imao sam ranije nešto takvo, ali sam negde izgubio :(
os.55marshall,
te> Ima li neko programcic za pretvaranja skriptova u executable datoteke ??
te> Imao sam ranije nesto takvo, ali sam negde izgubio :(
xa ?
Kako mislis da skript pretvori u executable ?
I da li mislimo na isto ?
Pod script-om podrazumevas fajl koji pozivas sa :
execute <ime_fajla>
?
Mozes da ga protektiras sa +S flegom, pa da ga izvrsis samim pozivom
njegovog imena, bez execute..
** Amiga SOR VERSION 1.0 registred to marshall
os.56ljubinko,
Pojavio se jedan tekst o Workbenchu 4.0.
Ima li neko detalje o tome ?
os.57marshall,
lj> Pojavio se jedan tekst o Workbenchu 4.0.
lj> Ima li neko detalje o tome ?
Pravo da ti kazem, ako je to ono sto sam procitao, onda mozes slobodno
da zaboravis.. Neki klinci su uzeli i igrali se malo - u prevodu
napisali taj kratak tekst o nekom operativnom sistemu kome treba
minimalno 34 Mb RAM-a da bi radio i koji ce biti kompatibilan donekle sa
Win-om, u tom smislu sto ces moci da postignes treperenje misa. Eto..
Vidis na kom je nivou taj tekst..
** Amiga SOR VERSION 1.0 registered to marshall
os.58jmodli,
Subject: LaserJet
najzad sam na amigu nakacio laserski printer (hp laserjet ii), ali mi se ni
malo ne svidjaju rezultati.
stampanje slike iz dpainta je ocajno, a on koristi workbench drajvere za
printer. najbolje se pokazao kada se u preferences namesti floyd-steinberg
dithering i gray scale 1, ali to je i dalje daleko od prihvatljivog
kvaliteta (ili bar onog koje sam dobio stampajuci na pisiju iz Graphics
Workshopa).
na zalost, trenutno nemam nijedan drugi program iz kojeg bi mogao da
proverim da li je ovo pravilo ili samo dpaint slucaj. znam da mi je ranije
iz page stream-a radio odlicno, ali on ima svoje drajvere za printer.
e sada... da li postoje (i gde mogu da se nadju) bolji drajveri za laserjet
od onog koji se dobija uz workbench v3? ili koje parametre podesiti u
preferences da bi se dobio pravi kvalitet? (mada sumnjam da moze bolje jer
sam probao sve kombinacije.)
. josip
os.59ljubinko,
>na zalost, trenutno nemam nijedan drugi program iz kojeg bi mogao da
>proverim da li je ovo pravilo ili samo dpaint slucaj. znam da mi je ranije
>iz page stream-a radio odlicno, ali on ima svoje drajvere za printer.
Stampaj opet iz Page Streama !
os.60jmodli,
> Stampaj opet iz Page Streama !
:). fala bogu da hocu (samo da instaliram v3).
inace, wordworth 3.1se mi je sam instalirao novi drajver za laserjet pa je
sada podnosljivo cak i iz dpaint-a.
. josip
os.61vpoznanovic,
>> na zalost, trenutno nemam nijedan drugi program iz kojeg bi mogao da
>> proverim da li je ovo pravilo ili samo dpaint slucaj.
Meni rekoše da Studio Print "jede malu djecu" po pitanju štampanja
grafike. Program imam, ali se još nisam nakanio da provjerim koliko u toj
priči ima istine.
os.62marshall,
jm> Subject: LaserJet
jm> najzad sam na amigu nakacio laserski printer (hp laserjet ii), ali mi se ni
jm> malo ne svidjaju rezultati.
jm> stampanje slike iz dpainta je ocajno, a on koristi workbench drajvere za
jm> printer. najbolje se pokazao kada se u preferences namesti floyd-steinberg
jm> dithering i gray scale 1, ali to je i dalje daleko od prihvatljivog
jm> kvaliteta (ili bar onog koje sam dobio stampajuci na pisiju iz Graphics
jm> Workshopa).
OS3 ti ne donosi nikakve nove drajvere (mislim, mozda i jesu novi, ali
sto se kvaliteta tice, to je isto sr..)
Ja ti preporucujem program Studio Printer, koji vrlo lepo stampa, a
zamenjuje prakticno sistemski drajver (ubacuje se umesto njega).
Sistemski drajveri nisu namenjeni da stampaju u paleti od 16.7 miliona
boja (vec maksimalno 4096, tj. 16 nijansi sive !!!).
Ovaj program sve to vrlo vesto ispravlja, i pravo da ti kazem, kod mene
jako lepo stampa - imam HP DeskJet 500C.
Pozdrav !
** Amiga SOR VERSION 1.0 registered to marshall
os.63vpejovski,
Installer v1.24 documentation converted to AmigaGuide format
------------------------------------------------------------
Sympathy for the DeViL ----> AMIGA <---- ;)
instguid.lhaos.64vpejovski,
Alert Patch v1.1 - get more informations from Guru Meditation ;)
----------------------------------------------------------------
alptch11.lhaos.65teorist,
Da li neko koristi AFS na HD-u ???
Razmišljam se da na radnu particiju postavim isti, ali bi želeo da
čujem još iskustava.
P.S.
Ako je neko postavio AFS na BOOT particiju, neka DOBRO PAZI šta radi
u slučaju da priključuje i drugi HD na Amigu.
U ponedeljak sam kod drugara imao veoma neprijatno iskustvo...
Priključili smo moj HD kao SLAVE, a njegov kao MASTER (a on je imao
AFS na BOOT-u). Po dizanju sistema Amiga je prepoznala samo SLAVE HD,
a mi smo ne razmišljajući ušli HDToolBox-u, prijavili i onaj drugi HD i
uradili 'save changes to drive' :(((
Šta se desilo ? :( Prve dve particije su otišle 'bogu na istinu' :((((
os.66teorist,
HITNO POTREBNA POMOC !
Razvalidirala mi se jedna particija na HD-u od 584 MB i sada kada se
digne sistem on pocne da validira disk, ali posle nekih pet minuta
prosto se resetuje :(((((( i onda, opet ponovo i opet reset :(((((((
Particija je FFS ! Sa QB Toolsom sam pokusao, ali ne moze da pocne da je
popravlja jer bitmap je neispravan...
Ima li neko ideju kako da je sredim ???
UNAPRED ZAHVALAN.
os.68teorist,
AREXX GUIDE -
vodic za AREXX skript jezik
Lepo stivo za svakoga ko zeli da nauci ponesto o AREXX-u.
Amiga GUIDE format.
arexxg2r.lhaos.69nenad,
> Lepo stivo za svakoga ko zeli da nauci ponesto o AREXX-u.
>
> Amiga GUIDE format.
Pošto pretpostavljam da je taj format prilično nečitljiv na
drugim računarima, da li bi mogao da se dobije neki izvod o tome
koje su razlike amiginog REXX-a u odnosu na originalni IBM-ov?
os.70teorist,
! AMIGA DOS GUIDE !
vodič za AMIGA DOS...
adosgui.lhaos.71mikis,
+> Pošto pretpostavljam da je format prilično nečitljiv na
+> drugim računarima, da li bi mogao da se dobije neki izvod o tome
+> koje su razlike amiginog REXX-a u odnosu na originalni IBM-ov?
Pre svega, format je relativno čitljiv i na drugim računarima, pošto
se radi o hipertekst dokumentima, ali u čistom ASCII obliku (veoma slično
HTML-u, čak postoji i program za konverziju AmigaGuide<->HTML; doduše samo
za Amigu).
Drugo, sam programski jezik je praktično identičan, osnovna razlika je u
spoljnim bibliotekama koje ovi programi pozivaju/koriste. Uostalom, evo
jednog fajla sa spiskom svih osnovnih Arexx komandi, ovaj put u čistom ASCII
obliku. Najtoplije ga preporučujem i svim Amigistima koje ova tema zanima,
jer je izuzetno koristan kao podsetnik pri pisanju Arexx programa.
(svojevremeno sam napravio AmigaGuide verziju, ali bojim se da je
nepovratno stradala :( )
arexguid.lhaos.72teorist,
=> Pre svega, format je relativno čitljiv i na drugim računarima, pošto
=> se radi o hipertekst dokumentima, ali u čistom ASCII obliku (veoma slično
=> HTML-u, čak postoji i program za konverziju AmigaGuide<->HTML; doduše samo
=> za Amigu).
A jel možemo i mi da dobijemo AmigaGuide <-> HTML ? O:)
os.73mikis,
+> A jel možemo i mi da dobijemo AmigaGuide <-> HTML ? O:)
Naravno :) Uz poruku je program Guide2HTML, koji konvertuje iz
AmigaGuide-a u HTML (za obrnut slučaj ne znam da postoji neki
konvertor). Osim njega, možete koristiti i Headley, program za kreiranje
AmigaGuide fajlova koji takođe ima mogućnost eksporta u HTML.
gui2html.lhaos.74mikis,
From: jmayer@informatik.uni-kl.de (Joerg Mayer)
Subject: Linux/68k-FAQ v1.11
Date: 8 Feb 1996 03:42:07 GMT
Last-modified: 96-02-08
Frequently Asked Questions on Linux/m68k
A Linux port to Motorola's 680x0 processors
Version of this FAQ : 1.11
Version of Linux/m68k : 0.9.13 (old) and 1.2.13pl6 (current)
Version of Linux : 1.2.13 (stable) and 1.3pl60 (experimental)
Version of amiboot : 2.2 (not for 0.9.13)
Version of ataboot : 1.6 (not for 0.9.13)
os.75mikis,
+> LowFrag v1.2 (1-Feb-96) - By Eric Sauvageau.
Wow, pa ovo stvarno radi :)) Možemo mi pričati šta hoćemo, ali
AmigaOS zaista ima problema sa fragmentacijom memorije :( Ovo programče
jako lepo radi, naročito sa programima koje svakodnevno koristim a koji
vole da malo prave nered po memoriji (Terminus, npr. ;) Najtoplije
preporučujem.
BTW, čujem priče da izlazi novi model Amige, koji će raditi pod
AmigaOS-om 3.2, a imaće 68EC030 procesor. Zaista mi je krivo što i
Escom/AT nastavlja sa tradicijom ugrađivanja obogaljenih procesora, bez
MMU-a koji bi ovakve probleme jako lepo mogao da reši :((
os.76vpoznanovic,
>> BTW, čujem priče da izlazi novi model Amige, koji će raditi pod
>> AmigaOS-om 3.2, a imaće 68EC030 procesor. Zaista mi je krivo što i
>> Escom/AT nastavlja sa tradicijom ugrađivanja obogaljenih procesora, bez
>> MMU-a koji bi ovakve probleme jako lepo mogao da reši :((
Ako će ti modeli biti u rangu cijena sa sadašnjim Amigama 1200, što se
realno može očekivati od Escoma, ne bih imao ništa protiv. :)
Btw, ja sam se u međuvremenu malo detaljnije informisao o Walkeru, ali o
tome nekom drugom prilikom kad budem imao više vremena.
os.77vpoznanovic,
BootUte v2.7
Short: System Degrader, now not Shareware, 2.04+
Author: pt@dmu.ac.uk (Paul Toyne)
Uploader: aa126@freenet.akron.oh.us (Val Hite)
Type: util/misc
BootUte is a system degrader to enable more badly written programs to
run on expanded and/or newer Amiga's.
This version is an update to :
util/boot/BootUte.lha
util/boot/BootUte_v2.3.lha
util/misc/BootUte_v2.4.lha
util/misc/BootUte_v2.5.lha
util/misc/BootUte_v2.6.lha
util/misc/BootUte_v2.61.lha
util/misc/BootUte)v2.62.lha
All versions need Kickstart 2.04 or above.
Recent changes (newer changes at the end) :
1) Now works on machines running versions of Workbench prior to 2.1.
2) Now works on NTSC machines without the PAL monitor driver in the
DEVS:Monitors drawer.
3) Doesn't crash on exit if you have more than 8 megabytes of memory.
4) Bug removed that could cause a crash if you didn't have a keyfile.
5) CliExec program included to make it possible to run programs that
require command line arguments.
6) Various small bugs removed.
7) No longer SHAREWARE, so all of the keyfile code removed.
This is the LAST planned release of this program.
bootut27.lhaos.78vpoznanovic,
Još jedan korak dalje u razvoju console handlera... Moćno, nema šta.
KingCON v1.3
==============================
SHORT description of KingCON
==============================
KingCON is a console-handler that optionally replaces the standard
'CON:' and 'RAW:' devices. It is 100% compatible, but adds some VERY
useful features, such as..
* Filename-completion (TAB-expansion)
* A review-buffer
* Intuition menus
* Global preferences
* Jump-scroll. (FAAST output!)
* Asynchronous typeahead. (Optional)
* Cursor-positioning using the mouse
* MC68020-optimized version
* And more...
========================
Installation and usage
========================
If you don't like reading manuals longer than one screen-page, then
install KingCON by running 'Installation'. This copies the necessary files
and mounts 'KCON:' and 'KRAW:' for you.
To start a Shell that opens in a KingCON-console, type the following (in
an already opened shell):
NewShell WINDOW KCON:
or
NewShell WINDOW KCON:////Testing/CLOSE/JUMP
If you now want to try out the filename-completion, type this:
type s:sta
Hit the TAB-key (directly after the last 'a'), and you will get the idea
with filename-completion. Or do you always spell 'Startup-Sequense'
correctly in less that 1 second?
Even if you don't like it, please read KingCON.doc or KingCON.guide for
a thorough explanation of all the new features that KingCON brings!
/Ć\ David Larsson /Ć\ Engineering Physics /Ć\_/ĆĆĆĆ
/ \_/Ć\ /ĆĆĆ\_/ \ Chalmers University of Technology / Sweden
/ \_/ \ /Ć\ /Ć\ /Ć\_/Ć\ /
Ć\ / \ / \_/ \ / \ /
\_/ f92dala@dd.chalmers.se \__/ \_/ \__/
kngcon13.lhaos.79mikis,
From: Steffen Haeuser <magicsn@birdland.es.bawue.de>
Date: 30-04-96 13:39:00
Subject: Any comments about p-OS ?
Newsgroups: comp.sys.amiga.misc
Lines: 28
Well...
i do not know if you guys heard it already ... proDAD is doing an OS, with the
first version being for Amiga only (but it will probably be ported to IBM
PowerPC systems and Mac and probably even more systems later, as it is written
in GNU C and VERY easy to port...)
Some features :
- Very AmigaDOS like, in fact, *good* written Amiga stuff should run on it
after re-compilation.
- True 24 Bit.
- Client/server System like X-Window
- Multiple monitors possible (you even can drag a window from one monitor to
the other one, like on NeXt...)
- No WB Emulation stuff used, instead : Direct GFX Board support
- Will be on Power Amiga too, as soon as it shows up
- Gadgets can not only be switched but there can be "Gadget-Animations"
whatever this is
- Beta was showed to some people at the CeBit (running on a DraCo)
- IBM and Apple were VERY interested
- Sort of "AmigaOS with some old stuff that has to go thrown out"
- Still VERY efficient (similar features as to efficiency and memory usage as
AmigaDOS)
- Is able to run parallel to AmigaDOS
Sounds neat, doesn't it ? :)
Steffen Haeuser
os.80mikis,
: Any more info about it ? An URL perhaps ?
http://www.magnamedia.de/amiga/magazin/a05-96/prodad.html (in german)
Here are some important bits which were missing in the original posting:
- developer versions will be available soon
- the whole system kernel is object oriented but, for compatilibity reasons,
implemented in ANSI C instead of C ++
- there will be a developer version with system snoop functions and runtime
function parameter checks, etc ..
- it runs parallel to AmigaOS _now_ (for the development phase only)
- libraries and devices match to 99% the AmigaOS originals
- scheduling is Round-Robin (like AmigaOS) but the task owning the active
window can automatically get a higher priority (like Executive)
- the OS optimizes graphic operations for local or remote displays.
- the demo version has impressive graphic abilities: moving full windows
while the text inside is scrolling, even with overlapping windows, is
no problem (on a Draco).
- cooperation with AT, MacroSystem, Phase5, etc has not yet happend but
is planned.
- supports fast "daughter layers" (which allows to scroll gadgets to
non visible areas, like MUI)
- aims at source code compatiblity to AmigaOS.
- will probably be released first quarter 97.
- address:
proDAD, Feldelestr. 24, D-78194 Immendingen, Germany
Tel. +49 7462 91134, Fax. +49 7462 7435
--
os.81kangaroo,
Oberon 3.2 1-4
ob32d1.dmsos.82kangaroo,
Oberon 3.2 2-4
ob32d2.dmsos.84kangaroo,
Oberon 3.2 3-4
ob32d3.dmsos.85kangaroo,
Oberon 3.2 4-4 Mozda nekome i zatreba :)
ob32d4.dmsos.86vpoznanovic,
Short: IPrefs 40.17 & WBPattern 40.02
Author: CHEF@CONNECT.gun.de (Hans-W. Schober)
Uploader: CHEF@CONNECT.gun.de (Hans-W. Schober)
Type: util/boot
FastIPrefs is rewritten by H.-W. Schober
added new futures to WBPattern.
Bugfixed Version
------ FastIPrefs & WBPattern ------
What is new on FastIPrefs ?
=======================
1.Setup Futures with WBPattern.
2.Using Precision from
graphics.library
3.Pics are positonable.
4.Usable with CyberGfx.
5.IPrefs now load's JPEG-datatype-
Pics. ( Stack )
6.IPrefs allocated colorpens 4-7
on Workbench. ( MagicColors )
7.Wb-backdrop-pics are shown
faster. ( PatchDT )
8.Wb-backdrop-pics are loadet into
FastMem. ( IPrefs2Fast )
9.IPrefs load the pics into Chip-
Mem if you goes to an AmigaMode.
( No GURU )
Copy FastIPrefs to C:IPrefs and
use the new WBPattern for Setup.
Please send new ideas or your
bugreports to :
CHEF@CONNECT.gun.de
fipr4017.lhaos.87vpoznanovic,
Short: Amiga Technologies V43.3 Installer dev. package
Author: heinz@amiga.de
Uploader: heinz@amiga.de
Version: 43.3
Type: util/misc
Replaces: util/misc/Installer-43.1*
Requires: V37, HD recommended
inst433.lhaos.88vpoznanovic,
Short: ReqTools 2.5 - the requester toolkit (user)
Author: nico@augfl.be (Nico Francois), cmh@lls.se (Magnus Holmgren)
Uploader: cmh@lls.se (Magnus Holmgren)
Type: util/libs
---------------------------------------------------------------------
NOTE: This is the user archive. There are no includes, autodocs, glue
code, catalog sources or example files included.
---------------------------------------------------------------------
reqtools.library is a standard Amiga shared, runtime library. The purpose
of ReqTools is to make it a lot quicker and easier to build standard
requesters into your programs. ReqTools is designed with Commodore's style
guidelines in mind, all requesters have the look-and-feel of AmigaDOS
Release 2.
ReqTools features the following requesters: a query requester, a string
requester, a number requester, a file requester, a font requester, a
palette requester, a volume requester and a screenmode requester.
Also included are RTPatch (1.4) and RexxReqTools (1.3):
RTPatch is a small program that will re-route functions from most popular
requester libraries to ReqTools. Libraries currently supported are Arp, Req
and Asl. RTPatch will also patch some functions in Intuition to give you
improved system requesters.
RexxReqTools gives ARexx users easy access to a large family of requesters.
All requesters are easy to use; they require one or no arguments. But the
requesters also have a lot of power through several optional arguments and
through tagstrings. RexxReqTools itself doesn't implement any of these
requesters, it is a link between ARexx and ReqTools.
*************************************************************************
RELEASE 2.5 (Library version 38.1387)
Now really includes RexxReqTools 1.3. Sorry about that.
RTPatch now reports itself as 1.4 (forgot to assemble that minor change
;).
Improved pragmas for SAS/C, to make better use of the tagcall. Note
that this may cause problems (I got a CXERR in one case). Also
changed the name to "reqtools_pragmas.h".
Changed the LED rendering a little. It is now done earlier, to work
nicer with custom handlers that can be slow in certain operations
(like ArcHandler).
Recompiled with SAS/C again. ;) I don't think any problem have been
introduced due to this.
Increased the pattern text buffer in the file requester.
The volume list in the file requester should now show all real volumes,
including e.g. network volumes. In fact, it should display the same
volumes as ASL, since the same algorithm is used. Thanks to Martin
Taillefer for showing me how to do it properly.
Added a little "hack" to make ReqTools work better with BetterEdit. It
was so simple, so why not? ;)
Added color wheel to the palette requester! There is a switch in the
preferences editor, in case you don't like it. Some notes: You need
properly installed colorwheel and gradientslider gadgets (part of OS
3.0 or higher) for it to be displayed. The colorwheel will only show
up if the screen and window are large enough. The gradient slider
doesn't have any fancy background currently, as it requires a rather
large number of colors to be displayed nicely, IMHO. And most
importantly; the top value of the slider is to the *left* for some
reason. Not my fault! ;)
Selecting parent in the file requester, when the parent does not exist
does now work. Sort of. The drawer gadget is now updated, so that you
can "parent back" to a drawer that do exist.
In the palette requester, when you are in copy, swap and spread modes,
the title of the window will show the current mode.
The palette requester should now work better on deep screens (more than
8 bits). It will then limit itself to display only 256 colors.
*************************************************************************
ReqTools 2.5 - reqtools.library
Copyright (c) 1991-1994 Nico Franšois
1995-1996 Magnus Holmgren
rqt25usr.lhaos.89vpoznanovic,
Short: Preferences for CPU (up to 68060) and RAMSEY. V3.7
Author: shred@tfh.dssd.sub.org (Richard Koerber)
Uploader: shred@tfh.dssd.sub.org (Richard Koerber)
Type: util/wb
Description:
This is a preference editor for steering the processor caches,
RAMSEY, VBR and Audio Filter. Gain the maximum speed out of
your AMIGA! SystemPrefs fully supports 68060 and DraCo! :^)
Features:
- Font adaptive GUI
- Supports Instruction- and Data-Caches, Copyback, Write
Allocate
- Supports 68060's Branch Cache, Superscalar mode, Store
Buffer and Half Cache Size Mode
- Supports RAMSEY FastMode (60ns RAM access --> SPEED! :-)
- Supports audio filter
- Supports VBR to Fast RAM
- Reads current hardware settings while startup
- Shows your system setup
- MacroSystem's DraCo workstation compatible :^)
- Comes with a nice preferences icon... :-)
- Stores its window position
New Features:
- Supports expname.library: shows more detailed information
about your system!
- Small bugfix
Requires:
Kick 2.04+, (opt. locale), 68010+ should be present
Languages:
English, Deutsch, Svenska
Distributability:
Freeware, Binary only.
See also:
util/libs/ExpName22.lha
syspre37.lhaos.90vpoznanovic,
Short: VersionWB 1.21 replaces c:version. New features.
Author: nv93e-ph@jakgym.se (Hňkan Parting)
Uploader: nv93e-ph@jakgym.se (Hňkan Parting)
Type: util/wb
VersionWB is a replacement for the usual c:version command.
***********************************************************
* Now you can shift-select an icon with VersionWB and then*
* get the version number and all that other stuff. Or why *
* not set VersionWB as a menu item with Toolmanager. *
***********************************************************
You can also pick the file you want to know the version number
of by using a file requester.
Changes from version 1.20:
V.1.20 (01.05.96) PUBLIC RELEASE. Now displays misc string, with author
information. The search routine is now optimized, and therefore three times
faster than before.
V.1.21 (13.05.96) PUBLIC. Fixed some bugs. Now text after the version number,
but before the date will be showed at the version number's row. Some strings,
with a long date string were not found. Optimzed even further. Improved error
handling. Implemented a new feature. Shift-double-click from workbench. If no
icon is selected a File-requester will come up.
This program is Postcard-Ware.
If you use itdon't forget to send me a postcard of your town.
Version 1.21 (13.05.96)
Copyright 1994/1995/1996 Hňkan Parting
verwb121.lhaos.91mikis,
+> Prenosim ovo u konferenciju, jer mislim da moze.
Naravno da može :) A možda je ovo i prikladniija tema.
+> Hardverski je tesko ugraditi 3.1 u Amigu 500, ali bi moglo softverski
+> sa ZKick-om, koji je ranije bio u modi. Kickstart bi se onda kopirao u
Dakle, sad sam proverio, i ispostavilo se da sam bio u pravu - postoji
verzija AmigaDOS 3.1 kit-a (tako se to zvanično zove :) i za A500/2000.
Dotični kit sadrži ROM (Kickstart), diskete (WB) i uputstva. Postoje još dve
verzije, za A3000 i A4000/A1200 (s tim da je ova druga malo problematična jer
nema potpunu podršku za A1200-tkin PCMCIA interfejs).
Zanimljivo je da je verzija za A500/2000 svojevremeno bila nekih 10
USD jeftinija, što je i razumljivo jer se kod nje Kickstart ROM nalazi u
jednom (512 KB) čipu umesto u 2x256KB kod druge dve.
+> treba vise. Doduse moze se prosiriti na 1 Mb ali kada se sve sabere i
+> oduzme bolje je preci na Amigu 1200 ili eventualno A600 (Ja sam video
+> jednu A600 sa 2 Mb RAMa).
Ali sa ovim se u potpunosti slažem :)
os.93mikis,
Ename v2.0 (18.6.96)
by Rafaţ Mantiuk
Cli's "Rename" command is not too useful when more than a few files needs to be
renamed. Let's consider practical situation: There are hundred animation
frames. Each frame is named "Animation001.jpg", "Animation002.jpg", ... You
need all frames to be copied to MS-dos disk. But Crossdos gives every file the
same name "ANIMATIO.JPG". So before copying them you have to make all the names
shorter. You can type "Rename" command hundred times, or just enter:
EName Amination???.jpg Anim[ation]???.jpg
to rename the files to "Anim001.jpg", "Anim002.jpg", ...
Ename is not replacement for C:Rename command. This is a new Cli command, which
helps renaming groups of files.
Features:
-) Uses system's patterns to select source files.
-) Simple and powerful <new name> creation syntax.
-) Fixes problem of renaming files to files that already exist. E.g.: There are
two files: "foo" and "foo.bak". One wants to add suffix ".bak" to each of these
files. Renaming "foo" file first would cause an error, because "foo.bak"
already exists. Ename renames in proper order, so this error will newer occur.
-) Possibility of changing case of names ( to upper case or lower case ).
-) Pure. Can be made resident.
ename20.lhaos.94mikis,
Evo kako jedan od Amigista zamišlja novi Workbench (4.0)... Jako
zanimljivo, mora se priznati :)
amigaos4.jpgos.95mikis,
Short: First try of Macintosh BOOPSI gadgets..
Author: dbalster@uni-paderborn.de (Daniel Balster)
Uploader: dbalster@uni-paderborn.de (Daniel Balster)
Type: dev/gui
*** NONSENSE WARNING ***
This is a quick and funny hack I wrote some days ago during the examination
of some GUI designs.
It just opens a window, adds a ZOOM, SIZE, CLOSE and a DRAGBAR gadget and
fills it white.. but all gadgets have the Macintosh(TM) look :-)
Feel free to use this source in your own applications (applications ??
for real programs, please, DO NOT USE IT!).
Have a look at these Functions:
struct Window *win = OpenWindoid ("Workbench",tags, ...);
CloseWindoid(struct Window *win);
init() and kill() are only used to initialize the BOOPSI classes.
windoid.lhaos.96mikis,
Short: Loads, Lists and Flushes libraries. v1.0
Author: fstckjo@lux.latrobe.edu.au (Karl J. Ots)
Uploader: fstckjo@lux.latrobe.edu.au (Karl J. Ots)
Type: util/cli
Requires: OS2.04+
Library Manager v1.00 is a small (3K) CLI utility that can perform
the following functions:
* Load a specified library into memory.
* Load all libraries in the LIBS: dir into memory.
* List Disk and ROM Libraries in memory.
* List a specific Disk or ROM Library in memory.
* Flush any or all Disk Libraries from memory.
Includes full source in E.
This is the initial release of LibMan. Any bug reports, OS
incompatibilities of suggestions for future developments would be
greatly appreciated. Send email at above address, or send to my
address included in the docs.
libman.lhaos.97mikis,
Short: Update of the dircmp2 command (Amiga)
Author: thomas.radtke@rz.uni-osnabrueck.de
Uploader: thomas.radtke@rz.uni-osnabrueck.de
Type: util/cli
Replaces: util/cli/dircmp2a#?
Example session:
»»»»»»»»»»»»»»»»
$ dircmp2 -h
dircmp2 V4.1 (18.07.1996)
(C) Thomas Radtke 1996
syntax: dircmp2 [-{cdDfhiprtxXv}] <directory1> [directory2]
The dircmp2 command lists all files and directories of directory1, that
cannot be found in directory2. If directory2 is omitted, the current
working dir is used
Flags:
-c compare files
-d show only directorys
-D show differing files only
-f show only files
-h this page
-i inverse comparison
-p show full pathnames
-r subdir scan
-t indent subdir results
-x <pattern> case insensitive pattern specification
-X <pattern> case sensitive pattern specification
-v explain the results, but do not operate
dircmp2a.lhaos.98mikis,
Short: The successor of WB95 conquers the WB again
Author: dbalster@uni-paderborn.de (Daniel Balster)
Uploader: dbalster@uni-paderborn.de (Daniel Balster)
Type: util/boot
*** NONSENSE WARNING ***
This is a quick and funny hack I wrote some days ago during the examination
of some GUI designs.
This program joins 'Workbench95' and 'Windoid' (both from me) to a new
nonsense hack for your amusement.
Note : make sure you read the guide
macwb.lhaos.99mikis,
Short: The best trashcan manager. (v1.0)
Author: muszynsk@ipeneuro.ipe.pw.edu.pl (Tomasz Muszynski)
Uploader: muszynsk@ipeneuro.ipe.pw.edu.pl (Tomasz Muszynski)
Type: util/wb
AmigaOS has a very good feature - Trashcan. But it is not convenient if you
use multiple partitions. Also you must use Workbench to manage files. I was
looking for a better trashcan. I found few, but it was only making drop icon
on
Workbench and nothing more. Have you seen Trash on Mac? Or even trashcan in
Windows 95? I was missing them so I wrote my own trashcan replacement.
It has following features:
- Deleted and replaced files are moved to trashcan (for all programs).
- Remembers original location of deleted files.
- Patches dos DeleteFile() function for increased functionality (now it can
delete not empty directory).
- You can use enchanced trashcan only on selected devices (eg. you can leave
standard operating of floppy disks and ram disks).
- Automatic trashcan emptying if there is out of free space.
- And many more...
Trashman is very helpful when using together with DirectoryOpus5 by Jonathan
Potter.
trashman.lhaos.100mikis,
Short: renames files in a flexible way (1.1) *BETA*
Uploader: steigerw@stud.uni-frankfurt.de (Martin Steigerwald)
Author: steigerw@stud.uni-frankfurt.de (Martin Steigerwald)
Type: util/cli
Distribution: NoCD
Some parts from the amigaguide documentation...
INTRODUCTION
This is a small utility that is able to rename file names! Hmm, a rename
command you think, why the hell I should need that?
mrename is much more flexible than the original rename command. It can add
extension, convert filenames to lower and to upper case, rename a bunch of
files at once, select files to rename via pattern matching, act
recursively and and and... ;-)
mrename.lhaos.101mikis,
Short: C-Shell (csh) 5.50, CLI replacement
Author: amk@zikzak.in-berlin.de (Andreas M. Kirchwitz)
Uploader: amk@cs.tu-berlin.de (Andreas M. Kirchwitz)
Type: util/shell
DESCRIPTION
C-Shell is a replacement for the AmigaDOS command line interface.
Many builtin Unix-like commands, very fast script language, file-
name completion, command-name completion, comfortable command line
editing, pattern matching, AUX: mode, object oriented file classes,
abbreviation of internal and external commands. Supports multiple
users.
C-Shell is easy to install and to use. Online help for all
commands, functions and various subjects. ARP-free!
NEW FEATURES
Changes since version 5.48 (summary):
- Warns if an executed program changed the priority of the
current task or the signal state shows unreleased signals.
- Fast successive calls to built-in function @rnd(0) more accurate,
seed is more "random" now.
- Built-in function @rnd, when called with seed=0 to build seed
value from current time-stamp, now always builds unique seed
value on every call.
- New built-in function: @mktemp. Returns a unique temporary file
name of form T:tmpXXXXXXXX, or just tmpXXXXXXXX if T: does not
exist. [thanks to Gary Duncan for source code]
- Built-in command now handles binary files properly, so it's
possible to use "cat file1 file2 >file3" to join files like
under UNIX. But note, that the built-in command "join" is
much more faster.
- Some minor enhancements and bug fixes.
Changes since version 5.42 (summary):
- Redirected output to a file can now be examined by other programs
while Cshell is still filling up the file. (files for redirection
are now opened "shared" instead of "exclusivly")
- Enhanced pipe functionality. Made "echo mem | csh" work again.
- Built-in command "copy" now has (optional) new output format which
prints full path of files being copied. (just try option "-x")
- Built-in commands "chown" and "chgrp" now accept also user and group
names (as well as numerical IDs). Does only work with "MultiUser".
- Built-in command "window" resizes/moves window much more faster now.
- Built-in command "version" now behaves more like Commodore's
command "version".
See file "HISTORY" in archive csh550.lha for complete listing
of changes and new features.
SPECIAL REQUIREMENTS
AmigaOS 2.0 (or higher)
csh550.lhaos.102mikis,
.name
Executive
.type
OS Utility
.short
A UNIX-like task scheduler/manager.
.description
Executive is a UNIX-like task scheduler for Amiga. It also has
plenty of other features previously available only in larger
operating systems.
Executive improves the responsiveness of your Amiga. No longer
running a CPU intensive program causes the whole machine to slow
down. You can start many CPU intensive programs and the machine
still feels as fast as before.
Executive also includes many useful client programs which let you
control tasks and monitor what's going on in your system.
The core of Executive is a scheduler that recalculates task
priorities based on system load average and task's recent CPU usage.
The scheduler will give high priority to interactive tasks and low
priority to CPU intensive tasks.
Executive is similar to Job Manager or Spy System, but it has more
features than these two together, for example:
- highly accurate (1/1000 seconds) CPU usage timing
- 6 different scheduling algorithms
- load averages
- process identifiers
- process group identifiers
- accounting
- focus - task with active window gets more CPU time
- support for MultiUser
Executive consists of a server and clients. The server is run
in the background and it takes care of scheduling, CPU usage
calculations and many other things. The client programs are:
Acct Accounting daemon
ALoad Display load average or CPU usage
ALoad3D Display load averages in 3D
Commander General task manager
Ctp Extended ChangeTaskPri
Kill Extended Break
Lastcomm List last commands executed
Meter Display system information
Nice Run programs with lower scheduling priority
Ps Process status displayer
Pstree Display child-parent relationships
Renice Renice a task
Sa Display accounting statistics
Stat Display some misc. information
Timer Time CLI and Workbench programs
Top Display information about top CPU tasks
Uptime Display system uptime and load averages
Executive doesn't use any illegal programming, it is fully compatible
with all Amiga computers running AmigaDos release 2.04 or newer.
Executive has been carefully designed to work with all kinds of
configurations and care has been taken not to break any programming
rules.
It's not possible to give a full description of all Executive
features here, so try it out. You don't want to use your Amiga
without it.
Executive is the highest rated item of Shareware CU Amiga magazine
has ever awarded at 98%.
.version
1.30
.date
1995.11.22
.author
Petri Nordlund
.restrictions
The freely redistributable version doesn't lack any crucial features
so it can be used without registering. Registered users get
process accounting, ALoad3D and Meter clients and 5 additional scheduling
algorithms.
.requirements
Requires AmigaDos 2.04 or newer, ~1MB disk
.distribution
Shareware
.price
$15(USD), 10 GBP, 70 FIM, 20 DEM, 100 NOK, 120 SEK, 500 BEF, 70 FRF, 25 NLG,
100 DKK
.address
Vanhamaantie 4
28800 PORI
FINLAND
.email
petrin@megabaud.fi
.exectype
68000, 68020
.installsize
1MB
.described-by
Petri Nordlund <petrin@megabaud.fi>
executiv.lhaos.103mikis,
- novo -
amiga\system\*.*
------------------
execut20.lha 822k ű Executive 2.0 - task scheduling/management kao na Unix-u
Short: UNIX-like process scheduler (V2.00)
Author: petrin@megabaud.fi (Petri Nordlund)
Uploader: petrin@megabaud.fi (Petri Nordlund)
Version: 2.00
Type: util/misc
Requires: AmigaOS 2.04
Replaces: util/misc/Executive.lha
Executive brings real multitasking to AmigaOS. Executive is a
UNIX-like process scheduler for Amiga. It also has plenty of other
features previously available only in larger operating systems.
Executive improves the responsiveness of your Amiga. One CPU
intensive application no longer causes the whole system to crawl.
You can start many CPU intensive applications and the system still
feels as if it would be totally idle.
The Executive package also includes many useful client programs
that let you control tasks and monitor what is going on in your
system.
The core of Executive is a scheduler that recalculates task
priorities based on system load average and task's recent CPU
usage. The scheduler will give high priority to interactive tasks
and low priority to CPU intensive tasks.
Lets say you are printing a document from a word processor. You
can't do much else while the document is being printed. This isn't
multitasking. With Executive you could also do some heavy rendering
and C-compiling in the background at the same time. You could surf
the web with your favorite browser without even noticing all these
programs running in the background.
Executive consists of a server and clients. The server is run
in the background and it takes care of scheduling, CPU usage
calculations and many other things. Some important features of
the server:
- precise (1/1000 seconds) CPU usage timing
- six different scheduling algorithms
- load averages
- process identifiers
- process group identifiers
- accounting
- focus - task with active window gets more CPU time
- MultiUser support
The client programs are:
Acct Accounting daemon
ALoad Display load average or CPU usage
ALoad3D Display load averages in 3D
Commander General task manager
Ctp Extended ChangeTaskPri
Dashboard The mother of all meters
Kill Extended Break
Lastcomm List last commands executed
Meter Display system information
Nice Run programs with lower scheduling priority
Ps Process status displayer
Pstree Display child-parent relationships
Renice Renice a task
Sa Display accounting statistics
Stat Display some misc. information
Timer Time shell and Workbench programs
Top Display information about top CPU tasks
Uptime Display system uptime and load averages
Executive is fully compatible with all Amiga computers running AmigaOS
release 2.04 or newer.
Executive is the highest rated item of shareware CU Amiga magazine
has ever awarded at 98%.
----------------------------------------------------------------------
The most notable changes in this release are:
- Schedulers have been improved and a real multi-level feedback
queue scheduler, found on most UNIX systems, is now available.
- New client, Dashboard, lets you open multiple windows and
interactively create all kinds of meters on them and adjust
their parameters. Everything is user configurable.
- PatchControl and ScreenNotify support.
- CPU usage can be displayed with Amiga's power LED.
- The server and some clients are now commodities. Scheduling
can be disabled and enabled without restarting the server.
- ExecutiveAPI is a new low-level API for application programs
that wish to directly control scheduling.
- A small tutorial is included.
- Tasks can now be scheduled as a group, if necessary.
----------------------------------------------------------------------
Executive has a WWW-page which has links to several Aminet
sites and also some nice screenshots. The URL is:
http://www.megabaud.fi/~petrin/Executive.html
os.104mikis,
- novo -
amiga\utils\*.*
------------------
newicodt.lha 18k ű NewIconDT V39.0 - datatype za "NewIcon" ikone
Short: DT for 'NewIcon' icons.Can convert 2 IFF
Author: phurni@cyber.ch
Uploader: phurni@cyber.ch
Version: 39.0
Type: util/dtype
Requires: OS 3.x, newicon.library (Aminet:util/wb/NewIconsV3.lha)
Replaces: gfx/conv/NewIconToBrush.*
Distribution: Anywhere
This is a picture datatype for 'NewIcon' icons. This datatype is meant to
replace the old and buggy NewIconToBrush program. To convert NewIcon images
to IFF you'll need a 'DataType to IFF' converter, Aminet:gfx/conv/dt2iff.lha
will do the job.
os.105mikis,
amiga\docs\*.*
------------------
libguide.lha 86k ű Vodič za Amiga biblioteke (libraries), AmigaGuide format
Short: Biggest Guide of Amiga shared libraries
Author: s93324@fh-telekom-leipzig.de (Heiko Schr÷der)
Uploader: s93324@fh-telekom-leipzig.de (Heiko Schr÷der)
Version: 1130.033.073
Type: util/libs
A guide of ! 1130 ! Amiga Shared libraries, listing the latest version
(date), which programs require them, the author with contact address
(e-mail), availability and so on.
Own Guide-section of OS Libs.
os.107jalex,
Ajde ako bi neka dobra dusa mogla da posalje
image fajlove Amiginog Kikstarta i Workbencha 3.0
(fajlovi treba da su u ADF formatu).
Inace to mi treba za UAE amigin emulator na PC-u.
thanx
P.S.Jel neko mozda zna da li jos radi Ecstacy BBS i koji
mu je broj telefona?
os.108kmilan,
>P.S.Jel neko mozda zna da li jos radi Ecstacy BBS i koji
>mu je broj telefona?
xe, xe, xe... da li radi najbolji bbs u YU :)
022-53-884
os.109vpoznanovic,
Najnoviji spisak mogućnosti nove verzije Amiginog operativnog sistema...
OS 3.5 FEATURES
_________________________________________________________________
BENEFITS OF THE AMIGAOS 3.5 UPDATE
Easy Internet Access
Support for Hard disks > 4GB
Modern Graphical User Interface (GUI) (updated)
Extensive CD-ROM Support
Support for current Printers
PowerPC Support
HTML Online Documentation
Bug Fixes (updated)
Enhancements (new)
EASY INTERNET ACCESS
TCP/IP Stack
- Easy to setup the connection to your provider within minutes
- Multi user support
- Multi interface support (Internet and Ethernet)
- Latest Socks v4/5 client module for firewalls
- Enhanced SANA II support for fast transfer rates
WWW Browser with Offline/Online Support
- Browsing the OS 3.5 documentation and the Internet
New Cross-Application E-mail Library
- General API for sending and receiving of E-mails
New E-Mail Client
- Based on the E-mail library
SUPPORT FOR HARD DISKS > 4 GB
NSDPatch
- New standard for 64 Bit Devices
- Updated Info, Format, Diskcopy and FastFileSystem
New HDToolBox
- The low-level library processes the following tasks
+ Scanning the SCSI bus
+ Read the physical information of the hard disk
+ Read/write the logical information (RDB)
+ Create Mount files
+ Read special Mount entries to restore the RDB
- HDToolBox application that uses the low-level library
+ New GUI style
MODERN GRAPHICAL USER INTERFACE (GUI)
New Icon Set (Glow Icons)
- New complete icon set for all system tools
- New icons for most applications
New Icon Library
- Icons with up to 256 colors
- Automatic color adaptation
- NewIcon compatible
- Compatible to OS 3.1 icons
- New API functionality (updated)
- Faster and more robust (updated)
New BOOPSI Library
- New complete set of powerful BOOPSI gadgets
- Very fast, modular and scalable
- AmigaOS compatible implementation
- Compatible to existing BOOPSI classes
New Resource Library
- Loads and manages all GUI resources
- Change the GUI without recompilation of the application
- Can be used with any programming language
New GUI Editor for Developers
- WYSIWYG GUI editor
- Creates resource files that are used by the new resource library
- Automatic localization of the application
Updated and enhanced Workbench (new)
- More responsive user interface (new)
- Progress requester for copy/delete (new)
- Enhanced information requester (new)
- Smart display update (new)
- New keyboard control functionality (new)
- New API functionality (new)
EXTENSIVE CD-ROM SUPPORT
CacheCDFS
- ISO9660, RockRidge, Joliet (Win 95/98) and MAC HFS compatible
- Supports Amiga protection bit and file comments
- MultiSession CD-ROM support
New PlayCD
- (programmable) Audio player for SCSI and ATAPI CD-ROM drives
- Low memory consumption
New CDFSPrefs
- CacheCDFS preferences for 'on the fly' configuration
FULL PRINTER SUPPORT
New Printer Device
- Drivers for all common printers
- PowerPC support
- New functions to print all kinds of bitmaps
- New API to define page size and page break correctly
- Support for 24 bit Picasso96 DumpRastPort command
- TurboPrint compatible functions to print 8 Bit chunky and 16/24
bit bitmaps
New Printer Preferences
- Updated for new GUI style
POWERPC SUPPORT
New WarpUP PowerPC Support
- AmigaOS compatible integration
- Extensive functionality
- Hardware independent driver system, easy to extend
New Preferences
+ Updated for new GUI style
HTML DOCUMENTATION
New Comprehensive Instructions
- Reworked documentation for Workbench, DOS, ARexx and Harddisk
- Completion of all the new features of AmigaOS 3.5
- Extensive Illustrations
- Bilingual English/German
BUG FIXES
- Corrections to improve overall robustness and to fix long standing
bugs (updated)
- Reworked A2024 monitor driver
- Reworked CLI command (Join, Status, Type)
- Reworked IPrefs command (more robust, better Workbench pattern
support) (new)
- Reworked LoadWB (new)
ENHANCEMENTS
- Updated asl.library (more responsive, faster, enhanced user
interface, more robust) (updated)
- Updated DataTypes (updated)
+ 8svx.datatype (now support stereo sound playback; faster and
more robust)
+ amigaguide.datatype / amigaguide.library (faster, new API
functionality)
+ anim.datatype (now supports all major IFF-ANIM formats; more
robust)
+ animation.datatype (now supports stereo sound playback; more
robust; new API functionality; RTG compatible)
+ ascii.datatype (faster and more robust)
+ cdxl.datatype (now supports stereo sound playback; more
robust)
+ ilbm.datatype (now supports true color pictures; more robust)
+ picture.datatype (now supports true color pictures, dithering
and color quantization; more robust, new API functionality;
RTG compatible)
+ sound.datatype (now supports stereo sound playback; more
robust, new API functionality)
+ text.datatype (faster and more robust)
- New DataTypes for GIF, JPEG, PNG and AIFF file format (updated)
- Updated 68040.library (performance improvements) (new)
- Updated bullet.library (performance improvements) (updated)
- New SCSI Mount tool
THE FUTURE (PLANS AND OPTIONS)
- Further Releases or Add-On Packages
- New reworked and extended Kickstart
- Extended PowerPC Support
- New 68K Emulator for PPC-only systems
- Many new System Libraries as PPC-native
Copyright by AMIGA
os.110praktica,
Strava, ja sam pre imao Amigu500 pa sam posle kupio neku 486-icu.
Prvi put cujem da se Amigin OS prilagodjava PC, a opet i zadrzava
svoju kratkocu i bolji kvalitet od glupok Win95-98 op.sistema.
Napravili su strava operativni.